swf 6 head embroidery machine thread keeps breaking

It is important to keep a total balance between your Upper thread (top thread) and your Lower thread (bobbin thread). If there is a burr on the edge of the needle hole in the needle plate, as the thread is coming back up, it can split or fray.

If one of your threads is too tight it can snap. As the needle is coming back up the thread will tighten if your tensions are set properly.

A loop is formed directly behind the eye of the needle.

The wrong tension can cause multiple problems and without the basic knowledge of the relationship between the top and bottom threads it is impossible to know how to correct them.Ī stitch is formed when the needle carrying the top thread passes down through the needle hole in the needle plate and connects with the bobbin thread. Very often a design would look so much better if only the tension was adjusted correctly on the machine. Once you develop this skill it will make a huge difference in your production and the quality of your finished embroidery. Embroidery thread tension is one of the most frustrating subjects within the world of embroidery and learning to adjust and maintain good balanced embroidery thread tension is a skill that must perfected.

Swf 6 head embroidery machine thread keeps breaking